User guide

IP Video Phone Using the Basic Call Functions
- 49 -
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1) Press the Hold soft key to put your active call on hold.
2) Press the Resume soft key to retrieve the call.
Call Transfer
You can customize your phone so that incoming calls are transferred directly to the third
party such as another extension, mobile phone number, etc. There are three ways to
transfer the call: Blind Transfer, Attended Transfer and Semi-Attended Transfer.
To Blind Transfer via phone interface:
1) A and B is on an conversation, A press the Transfer hot key to put B on hold, then
A can dial the third telephone number C and press the Transfer hot key to call out.
A will turn to hold status, and the LCD will display as Transferred.
2) After C answered it, or A press the End Call hot key to complete the transfer.
3) A will be disconnected from the call. B can talk to C.
To Attended Transfer via phone interface:
1) A and B is on an conversation, A press the Transfer hot key to put B on hold, then
A can dial the third telephone number C and press the OK/SEND button or click
button to call out.
2) After C answered it, A and C can have a private conversation without B hearing it,