User guide

IP Video Phone Using the Advanced Phone Functions
- 57 -
Network Setting
WAN
Configure WAN information via phone interface:
1) Click Setting-> WAN option to enter configuration page;
2) Click the corresponding icon to active the proper IP assignment type.
3) If you choose【DHCP】type, Press <F1> to save the changes;
4) If you choose【PPPoE】type, you should also configure the corresponding “User
Name” and “Password”. Then press <F1> to save the changes.
5) If you choose【Static IP】, please choose and configure “IP Address”, “MASK”,
“Gateway”, “DNS1” and “DNS2”, then press <F1> to save the changes.
Configure WAN information via web interface:
1) Choose Network.
2) Choose Internet Port (WAN) option to do the relating settings.
VLAN
VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location.
Configure VLAN information via web interface:
1) Choose Network.
2) Choose Advanced-> VLAN option.
3) Set the VLAN Status, and input the VID Number and choose USRPRIORITY.
4) Click Confirm button to save the changes.