User guide

IP Video Phone Configuring VP-2009(P) Elite
- 14 -
5 Configuring VP-2009(P) Elite
Setting Interface
User can configure many functions, such as: Account, Network, Call Feature, Display, Date & Time, Sound, Security,
Personalize, Reset, Reboot and Calibration,
To access the Setting page, proceed as follows:
Step 1
Press the Left/Right navigation key in the standby state to switch to the Main Menu.
Step 2
Click [Setting].
Set the Account
To configure the Account on the LCD, proceed as follows:
Step 1
Access the
Settings
page.
Step 2
Click
[Account]
Step 3
Enter the administrator’s password (the default password is
admin
).
Step 4
Click the , enter into the configure page.
Step 5
Configure the Account’s parameter.
Step 6
Click the
<Save>
.
Figure 5-1 Account
Table 5-1 Parameters about the Account
Parameter
Description
Enable Line
Whether to activate the account.
Click this icon to choose enabled or disabled the line,
represent enabled.
--Display Name
The local phone name showing on the other phone when calling.
--Register Name
SIP service subscriber's ID used for authentication.