User guide

IP Video Phone Configuring VP-2009(P) Elite
- 27 -
BLF
To set the DSS Key as BLF, proceed as follows:
Step 1
Click the “Type” option, and then choose “BLF” option in the pull-down menu;
Step 2
Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the
default account at present is adopted;
Step 3
Input the “Label”.
Step 4
Input the monitor number to be configured in the “Value” field.
Step 5
Input the feature code in the “Extension” field.
Step 6
Click the <
Save
>.
BLF List
To set the DSS Key as BLF List, proceed as follows:
Step 1
Click the “Type” option, and then choose “BLF List” option in the pull-down menu;
Step 2
Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the
default account at present is adopted;
Step 3
Click the <
Save
>.
Picture Dial
Users can enter the configuration interface not only through the Picture Dial interface, but also through the Picture Dial
configuration option in the function interface. Please refer to “Picture Dial” for more details.
To Configure Picture Dial function, proceed as follows:
Step 1
Access the
Call Feature
page.
Step 2
Click [
Picture Dial
].
Step 3
The configuration information of 6 pictures will be displayed in the left list;
Step 4
Click the corresponding list of sequence number and make the configuration by clicking the edit box on the
right. Parameters are as the chart below.
Step 5
Click the icon to save your settings.
Figure 5-15 Picture dial setting