User guide

IP Video Phone Using VP-2009(P) Elite
- 70 -
Redialing
If you redial a number, VP-2009(P) Elite uses the account that is used to dial the same number the previous time.
Step 1
Press <
RD
> key to enter into the Call History page.
Step 2
Select a record and then press <
RD
> key again to send.
Using the Call History to Make a Call
VP-2009(P) Elite provides a key for users to obtain the call record list. To using the call record list to make a call,
proceed as follows:
Step 1
Enter into the
Call History
page.
Step 2
Select a call history type.
Step 3
Select a record.
Step 4
Click the <
Video Call
> or <
Voice Call
> to send. Also can click to send with default type.
Using Address Books to Make a Call
To use address books to make a call, proceed as follows:
Step 1
Enter the
Directory
page.
Step 2
Select a contacts group.
Step 3
Select a record.
Step 4
Click the <
Video Call
> or <
Voice Call
> to send. Also can click to send with default type.
Using the IP Address to Make a Call
You can use the IP address of VP-2009(P) Elite to make a call to an IP address in the same LAN or VPN. For example,
you can use 10.10.10.1 to make a call to 10.10.10.2.
Step 1
Pick up the handset or press the <
SPK
> key to access the dial page.
Step 2
Enter the target IP address (for example, 10*10*10*2) and click to send.
Asterisks (*) replace dots (.) in the IP address.
Using Speed Dial to Make a Call
You can assign the speed dial function to a DSS key. After the key is configured with a frequently used number or a
complex number, you can directly press this key to make a call.
For details, see DSS Key.