User guide

IP Video Phone Using VP-2009(P) Elite
- 72 -
indicating transfer failure is displayed on the user A's phone screen. After pressing the <Resume> key,
user A resumes the call with user B.

Semi-attend transfer
Click the <OK> key.
User A hears the RBT. When user C's phone rings, user A presses the <Transfer> key. After user C picks
up the phone, user A hangs up the phone to complete the transfer.

Attend transfer
Press the <OK> key.
User A hears the RBT and user C's phone is ringing. After user C picks up the phone, user A asks user C
whether user C wants to answer user B's call. If user C says yes, user A presses the <Transfer> key to
transfer the call to user C. If user C rejects the call, user A presses the <Resume> key to resume the call
with user B.
Step 4
User B talks with user C.
Three-Party Conference
To establish a three-party conference, you need to use the conference key.
Step 1
User A is talking with user B. User A clicks the
<Conference>
. User B is held, and user A hears the dial
tone.
Step 2
User A dials user C's number and click .
Step 3
User A listens to the RBT, user B is held, and user C's phone is ringing.
Step 4
When user C picks up the phone, user A only talks with user C. To establish a three-party conversation, user
A clicks the
<Conference>
again.
Step 5
When user A hangs up the phone, the other two parties' conversation ends automatically.
If Transfer on Conference Hang up is set to Enabled, the other two parties' conversation
continues when user A hangs up the phone. The default value of Transfer on Conference
Hang up is Disabled for VP-2009(P) Elite. For details, see contents in “Features”.
BLF Function
After the BLF function is assigned to a key, you can learn about the status of other accounts (idle, ringing, or occupied)
on VP-2009(P) Elite. You can directly press the key assigned with the BLF function to make calls. This requires the
support from the server.
For details about how to assign the BLF function to a DSS key, see DSS Key.
When assigned BLF function, the DSS Key will show the status information of the specified extension. The statuses are
as follows:
Table 7-1 Parameters on the BLF
If the listened-on account is not in the idle, the DSS key icon will change. Change the to .
Status
Description
The listened-on account is in the ringing state. And the DSS
Key is red.
The listened-on account is in the talking state or in the dial
status. And the DSS Key is red.
The BLF function is disabled. And the DSS Key is green.
The BLF function is enabled. And the DSS Key is green.