IP DECT Phone W52P & W52H Quick Start Guide(V73.11) www.yealink.com Applies to firmware version 25.73.0.11 or later.
Packaging PackagingContents Contents The following items are included in your W52P package: (Optional) Handset Belt Clip Base Station Ethernet Cable Charger Cradle Two Rechargeable Batteries Two Power Adapters Quick Start Guide The following items are included in your W52H package: Handset Charger Cradle Power Adapter Belt Clip Two Rechargeable Batteries Assembling the Phone Assembling the Phone 1.
b. PoE (Power over Ethernet) Option IEEE 802.3af compliant PoE Hub/Switch 2. Connect the charger cradle, as shown below: 3. Insert the batteries into the handset, as shown below: 4. Charge the handset, as shown below: Note: The IP DECT phone should be used with Yealink original power adapter (5V/600mA) only. The charging status of the handset is indicated on the top right-hand corner of the LCD screen.
Getting Started Getting Started Network Settings You can configure the base station to obtain network settings in one of the following ways: DHCP: By default, the base station attempts to contact a DHCP server in your network to obtain the valid network settings, e.g., IP address, subnet mask, gateway addres and DNS address.
Basic Operations Basic Operations Turning Handset On/Off To turn the handset on, do one of the following: Long press until the LCD screen lights up. Place the handset in the charger cradle. The handset will be turned on automatically. To turn the handset off: Long press again to turn the handset off. Locking/Unlocking Keypad Long press when the phone is idle to lock the keypad. Long press again when the phone is idle to unlock the keypad.
3. Press the Options soft key, and then select Edit. 4. Edit the values in the Name, Number and Mobile fields. 5. Press the Save soft key to accept the change. To delete a contact: 1. Press the OK key to enter the main menu, and then select Directory. 2. Press or to highlight the desired entry. 3. Press the Options soft key, and then select Delete to delete the selected entry. To assign a speed dial number: 1. Press the OK key to enter the main menu, and then select Settings->Telephony->Speed Dial. 2.
Call Mute Press Press during a call to mute the call. again to un-mute the call. Call Hold and Resume To place a call on hold: Press the Options soft key during a call, and then select Hold. To resume a call, do one of the following: If there is only a call on hold, press the Resume soft key. If there are two calls on hold, press the Resume soft key to resume the current call, press the Swap soft key to swap between calls. Call Transfer You can transfer a call in the following ways: Blind Transfer 1.
About us Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers rom over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
