Quick Start Guide

Call Hold and Resume
To place a call on hold:
To resume a call, do one of the following:
If there is only a call on hold, press the Resume soft key.
Press the Options soft key during a call, and then select Hold.
If there are two calls on hold, press the Resume soft key to resume the current call,
press the Swap soft key to swap between calls.
Semi-Attended Transfer
Attended Transfer
Call Forward
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press the Options soft key during a call, and then select Transfer.
1. Press the Options soft key during a call, and then select Transfer.
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
To enable the call forward feature on a specific line:
Always----Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the line is busy.
No Answer----Incoming calls are forwarded if not answered after a period of time.
1. Press the OK key to enter the main menu, and then select Call Features->Call Forward.
5. Enter the number you want to forward the incoming calls to in the Target field.
7. Press the Save soft key to accept the change.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key.
2. Enter the number you want to transfer the call to.
4. Press the Transfer soft key after the call is answered.
4. Select Enabled from the Status field.
Call Mute
6. Press or to select the desired ring time to wait before forwarding (only for No Answer Forward) in
the After Ring Time field.
Press again to un-mute the call.
Press during a call to mute the call.
2. Press or to highlight the desired line, and then press the OK soft key.
3. Press or to highlight the desired forwarding type, and then press the OK soft key.
6
4. Press the Transfer soft key when you hear the ring-back tone.
3. Press to dial out.
3. Press to dial out.