Quick Start Guide

2
Note: When attaching the base station, we recommend that you make the screws protrude by
approximate 3 mm.
Assigning a Device Role
59mm
C
Celling Installation
1.Long press on the W80B for about 10 seconds till the three LED indicators slowly
flash green.
2.Press three times briefly.
The ROLE LED indicator glows orange, and the DECT and LAN LED indicators glow
green. The device will reboot to make the change take effect.
Note: When you change the base mode, the time interval between each button press should
be less than 3 seconds. The device will return to the original mode after 30 seconds of
inactivity.
Switching to the DM-Base Role
3 mm
The W80B is shipped as a base station. Before registering a handset to the W80B, you
need to switch the W80B to the DM-Base role. Then, the W80B can work as a DECT
Manager and base station.
Base Mode Options
The following shows the LED status after the W80B connects to the power and
network:
Normal Switch：
Easy Switch：
1.Press on the W80B three times quickly in one second.
Base Mode
Option
Role DECT LED ROLE LED LAN LED
1 Base Off Green Green
2 DM Off Orange Green
3 DM-Base Green Orange Green