Quick Start Guide

3
The handset LCD screen displays the IP address of the W80B.
Easy Registration:
Normal Registration:
1.Press the OK soft key on the handset, and then select Register Handset.
2.Select the desired base station and then press the OK soft key. The handset begins
searching the base station.
1.Press the Reg soft key on the handset to register quickly.
Before registering, long press on the W80B till the DECT LED indicator flashes. You
can only register one handset to the W80B using this method.
If the handset LCD screen does not prompt “Unregistered!”, press the OK key to enter
the main menu, and select Settings->Registration->Register Handset to register
the handset.
Note: If the handset is registered to the base station successfully, the handset LCD screen
prompts “Handset Subscribed”.
Contact your system administrator for registering more handsets to the base station.
The W80B must work with the W56H/W53H handset running a specific firmware
version. When you register an older handset to the base station, the handset
firmware will be automatically upgraded to a matched one.
Accessing the Web User Interface
1. Press the OK key to enter the main menu, and then select Status->DM.
2. Open a web browser on your computer, enter the IP address into the address bar
(for example, "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page
and click Confirm.
3.Press the OK soft key after searching a base station successfully.
4.Enter the base station PIN (default: 0000), and then press the Done soft key to
complete registration.
Registering the Handset
If the W56H/W53H handset LCD screen prompts “Unregistered!”, there are two
methods to register a new handset: