User guide - Base DECT

Getting Started
24
Viewing the Power Status
When the phone is idle, you can check the battery's remaining capacity.
Procedure
1. Navigate to Menu > Status > Power Status.
The screen shows the remaining talk time and standby time.
Entering Characters on the W56H/W53H
You can enter and edit data in the corresponding field using the handset keypad. The input modes are selectable.
Topics
Setting the Input Modes
Entering Data on the W56H/W53H
Entering Data on the CP930W/DD Phone
Setting the Input Modes
The handset provides you with 12 input modes, and different input mode provides different characters.
The default input modes are Abc, 123, ABC and abc. You can enable the input modes used frequently and switch
among them if needed.
Procedure
1. Navigate to OK > Settings > Display > Input Method.
2. Select the desired input mode, and then press Change.
Entering Data on the W56H/W53H
In corresponding input mode, you can press the keypad repeatedly to view the character (or numbers) options and
press more times to highlight the desired character (or number), the available characters under each key are displayed
at the left bottom of the phone screen.
The following table describes how to enter different characters using the keypad keys:
If you want to Then you can
Switch among input modes.
Press to switch among input modes.
The current input mode is displayed at the right bottom of the phone screen.
Enter letters.
Press a key one or more times (depending on what input mode you’re in) to enter the
possible characters that are displayed on the keypad key.
Enter special characters.
Press to enter the space character or the following special characters: _’ ” = / \ ^ ;
: , . - + * # § % & @ ? ! ¿ ¡ () {} [] < > ¥￡$| ~ ¤
Press :
l If it is in the uppercase (ABC), uppercase and lowercase (Abc) or lowercase (abc)
input modes, it will provide space character and the following special characters: . , ?
! 0
l If it is in the numeric (123) input mode, it will only provide the digit 0.
l Long press the key to enter the character +.
Delete the text.
Press or to position the cursor to the right of the text you want to delete, and then
press Del to delete one character at a time or long press to delete all characters.