User guide - Base DECT
Table Of Contents
- Table of Contents
- Getting Started
- Registering the Handset
- Call Features
- Placing Calls
- Answering Calls
- Disabling Call Waiting
- Switching Among the Receiver, Handsfree and Headset Modes
- Silencing or Rejecting Incoming Calls
- Ending Calls
- Muting/Unmuting Audio
- Holding and Resuming Calls
- Call Forward
- Transferring Calls
- Conference Calls
- Recording Using an SD Card
- Advanced Call Features
- Directory
- Call History
- Customizing Your Phone
- Audio Settings
- Maintaining Your Phone
- Appendix
Registering the Handset
26
Registering the Handset
You need to register your handset to the DECT manager (DM) if you want to use the basic functions of the DECT multi-
cell system.
Topics
Registering Handsets at the DECT Manager
Selecting a System to Connect
Registering Handsets at the DECT Manager
After your system administrator has set the DM to the registration mode via the web user interface, you can register
handsets to the DM.
Procedure
1. Do one of the following:
l Press the Reg soft key on the handset to register quickly.
l Press OK > Register Handset and then select the desired base to register the handset.
l Press OK > Settings > Registration > Register Handset and then select the desired base to register the handset.
After registration, the handset prompts “Handset Subscribed”.
Note: The default base PIN is 0000.
Selecting a System to Connect
You can connect the handset to a desired system manually, or allow the handset to connect the registered system with
the greatest signal strength automatically.
Procedure
1. Navigate to OK > Settings > Registration > Select Base.
The phone screen displays all systems that the handset is registered to and the BestBase option.
2. Select the desired system or BestBase, and then press Select.