User guide - Base DECT

Yealink W80 DECT IP Multi-Cell System User Guide
36
4. Do one of the following:
l When you hear the ringback tone, press the TRAN key or Transfer to finish a semi-attended transfer.
l After the contact answers the call, press the TRAN key or Transfer to finish an attended transfer (consultative
transfer).
Conference Calls
The phone supports creating a conference with other two external parties and multi-way network conference.
During the conference, follow these tips:
l Mute your microphone when you are not speaking, especially in noisy environments.
l Avoid tapping or rustling papers near the microphone.
l Speak in your normal voice without shouting.
Topics
Local Conference
Network Conference
Local Conference
You can initiate a three-way (including yourself) conference calls with your contacts on the phone.
Topics
Setting Up a Local Conference Call
Muting or Unmuting a Conference Call
Ending a Conference Call
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select Options > Conference to place a new call.
The active call is placed on hold.
3. Dial the second party’s number.
4. When the second party answers the call, selectConf. to invite two parties to join the conference.
Merging Two Calls into a Conference
You can invite a held call into a conference call with the active call.
Procedure
1. Place two calls on the phone.
2. Select the desired call for a conference and ensure that the call is active.
3. Select Options > Conference.
Muting or Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other except you.
Procedure
1. Press the MUTE key to mute the conference.