User guide - Base DECT

Table Of Contents

Yealink W80 DECT IP Multi-Cell System User Guide

Before You Begin

Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get the park

retrieve code from your system administrator.

Procedure

1. Dial the park retrieve code.

2. Follow the voice prompt to retrieve:

l Press the # key on the phone where the call is parked.

l Enter the desired extension followed by # (for example, 4606#) on any phone.

Related Topic

Retrieving a Call with a Retrieve Key

Parking or Retrieving a Call in the Transfer Mode

You can park the call to the shared parking lot through a blind transfer.

For some servers, the system will return a specific retrieve park number (park retrieve code) after parking successfully.

Topics

Parking a Call in the Transfer Mode

Retrieving a Parked Call in the Transfer Mode

Parking a Call in the Transfer Mode

You can park a call in the transfer mode directly. When you park a call to the shared parking lot, the call is held on your

phone.

Before You Begin

Your system administrator has set call park in the Transfer mode.

Procedure

1. During a call, select Options > Call Park.

The call will be directly transferred to the shared parking lot.

Retrieving a Parked Call in the Transfer Mode

You can retrieve a parked call in the transfer mode from any phone in the same network.

Before You Begin

Your system administrator has set call park in the Transfer mode. There is a call parked on the shared parking lot.

Procedure

1. Dial the park retrieve code.

The phone will retrieve the parked call from the shared parking lot.

Tip: When the phone is idle, you can use a Retrieve key to retrieve a parked call directly.