User guide - Base DECT

Advanced Call Features
43
Retrieving a Call with a Retrieve Key
You can easily use a retrieve key to retrieve a parked call quickly.
Before You Begin
Check with your system administrator if the FAC or Transfer mode is set on your phone, and if the call park feature has
set for your phone.
Procedure
1. Navigate to OK > Settings > Shortcut.
2. Select the desired shortcut key, and then press Change.
3. Select Retrieve, and then press OK.
When there is a call parked on the extension or the shared parking lot, you can press the Retrieve key on the idle
screen, and the handset will dial the configured park retrieve code.
Shared Line
Yealink phone supports using Shared Call Appearance (SCA) to share a line. So that this line can be registered on more
than one phone at the same time.
Your system administrator can set your phone to use the shared line.
Topics
State Indicator of Shared Line
Placing Calls on a Shared Line
Answering Calls on a Shared Line
Placing a Call on Public Hold
Placing a Call on Private Hold
Retrieving a Held Call on a Shared Line
Barging in an Active Call on a Shared Line
Pulling a Shared Call on a Shared Line
State Indicator of Shared Line
If your system administrator assigns the shared line to your handset, the SCA with an icon is displayed on the right soft
key.