User guide - Base DECT
Table Of Contents
- Table of Contents
- Getting Started
- Registering the Handset
- Call Features
- Placing Calls
- Answering Calls
- Disabling Call Waiting
- Switching Among the Receiver, Handsfree and Headset Modes
- Silencing or Rejecting Incoming Calls
- Ending Calls
- Muting/Unmuting Audio
- Holding and Resuming Calls
- Call Forward
- Transferring Calls
- Conference Calls
- Recording Using an SD Card
- Advanced Call Features
- Directory
- Call History
- Customizing Your Phone
- Audio Settings
- Maintaining Your Phone
- Appendix
Yealink W80 DECT IP Multi-Cell System User Guide
46
This feature is set up on the server-side and not all servers support this feature.
Topics
Setting the Voice Mail Code
Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect to the message center, you need to set the voice mail code on your phone.
Procedure
1. Navigate to OK > Voice Mail > Set Voice Mail.
On the CP930W, navigate to Menu > Message > Set Voice Mail Code.
On the DD phone, navigate to Menu > Message > Voice Mail > Set Voice Mail Code.
2. Select Enabled from the Status field.
3. Enter voice mail code in the Number field.
4. Select OK.
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1. Follow the voice prompts to leave a voice mail.
2. Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the handset directly.
Before You Begin
You need to set the voice mail code in advance.
Procedure
1. Navigate to OK > Voice Mail > Play Message or press Message key.
On the CP930W, navigate to Menu > Message > Play Message.
On the DD phone, navigate to Menu > Message > Voice Mail > View Voice Mail.
The handset dials out the voice mail code using the selected line automatically.
2. Follow the voice prompt from the system server to listen to your voice mails.
Related Topic
Setting the Voice Mail Code