User guide - Base DECT

Audio Settings
62
Audio Settings
You can change the basic audio settings on your phone.
Topics
Adjusting the Volume
Setting the Ring Tone
Setting the Advisory Tone
Adjusting the Volume
You can adjust the volume of the ringer, media, and audio during a call.
Procedure
1. Press the left or right navigation key.
On the CP930W, press the Volume touch key.
On the DD phone, press the Volume key .
Setting the Ring Tone
Ring tones are used to indicate the incoming calls.
Topics
Setting the Ring Tone for the External Calls
Setting the Ring Tone for the External Calls
You can select a unique ring tone for the external calls so that you can identify callers when the phone rings.
Procedure
1. Navigate to OK > Settings > Audio > Ring Tones > Melodies.
On the CP930W/DD phone, navigate to Menu > Settings > Basic Settings > Sound > Ring Tones.
2. Select the desired ring tone.
The ring tone is played automatically.
3. Select Save.
Setting the Advisory Tone
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states.
You can configure the following advisory tones independently:
l Keypad Tone: plays when you press any key on the keypad.
l Touch Tone: plays when you tap the keys (except the touch keypad).
l Confirmation: plays when a setting is changed or the handset is placed in the charger cradle.
l Low Battery: plays when the battery's remaining capacity is low and the handset needs charging.
Note: If the silent mode is activated, the advisory tones will not play, but you can still see the alert of low battery on the
phone screen.
Procedure