User Guide
Table Of Contents
- Contents
- About This Guide
- How to Power on/off
- Pair the Headset with Base
- How to Connect WH62/WH63
- How to Connect WH66/WH67
- How to Wear
- How to Use
- How to Manage Calls
- Yealink USB Connect
- How to Change Settings on WH62/WH63
- How to Change Settings on WH66/WH67
- Optional Accessories
- Support
| How to Manage Calls | 44
About this task
Procedure
1. Undock the primary headset.
2. Dock an additional headset in the primary headset’s base.
For WH66/WH67, you can also tap or the user account avatar, then go to Settings > Basic
Settings > Add Headset > .
3. For WH66/WH67, select As secondary to add the headset as an additional conference headset.
A tone indication will play in the primary headset.
4. Press the Call Control button on the primary headset to accept the additional headset to the
conference.
Once the call is established by primary headset, the audio will be shared between headsets. When the
call ends, the additional headset will disconnect from the base.
Additional headsets are muted by default when they pair.
Note: Additional headsets use their own tuning settings while in conferencing mode. You can
mute and adjust the volume in your headset without changing the settings on any other paired
headsets.
End or Leave a Conference Call
To end the call for all headsets, press the Call Control button on the primary headset, or dock the primary
headset in the base. Additional headsets can leave the conference by pressing the Call Control button on
the headset. The conference call will continue for all other headsets.
Transfer a Call from Desk Phone to Headset
Before you begin
• The base is connected to the Yealink phone via USB.
• A call is answered on the phone using the handset or speakerphone.