User Guide
Table Of Contents
- Contents
- About This Guide
- How to Power on/off
- Pair the Headset with Base
- How to Connect WH62/WH63
- How to Connect WH66/WH67
- How to Wear
- How to Use
- How to Manage Calls
- Yealink USB Connect
- How to Change Settings on WH62/WH63
- How to Change Settings on WH66/WH67
- Optional Accessories
- Support
| Yealink USB Connect | 47
4. Find the desired device and click Start pairing.
Note: Once the BT50 is paired with your device, you can delete the corresponding pairing
information on WH66/WH67 only when you reset the device to the factory. The WH66/WH67
only saves the pairing information of one BT50. After pairing a new BT50, WH66/WH67 will
automatically delete the old BT50 pairing information. For more information on how to pair and
delete pairing information on BT50, refer to Yealink USB Device Manager Client User Guide.
Download and Install
Before you begin
Connect the base to your PC.
Procedure
1. If it is the first time to connect the base to your PC, the PC prompts you as shown below: