User Guide
Table Of Contents
- Contents
- About This Guide
- How to Power on/off
- Pair the Headset with Base
- How to Connect WH62/WH63
- How to Connect WH66/WH67
- How to Wear
- How to Use
- How to Manage Calls
- Yealink USB Connect
- How to Change Settings on WH62/WH63
- How to Change Settings on WH66/WH67
- Optional Accessories
- Support
| How to Change Settings on WH62/WH63 | 49
Procedure
1. Connect the base to the power supply and PC.
2. Dock the headset in a base.
3. Update the base firmware via Yealink USB Connect.
• Check for updates
• Update manually
For more information on Yealink USB Connect, refer to Yealink USB Device Manager Client User Guide.
Important: You need to connect the PC to the micro USB port of the headset marked with the
text "PC".
Note: Do not undock the headset or power off the base during the upgrade, otherwise the
headset upgrade will fail. You can dock the headset in a base to upgrade again. The headset
cannot be upgraded when the battery is low (< 10%).
How to Change Settings on WH62/WH63
Headset, base, and general settings can be changed via Yealink USB Connect.