User Guide
Table Of Contents
- Contents
- About This Guide
- How to Power on/off
- Pair the Headset with Base
- How to Connect WH62/WH63
- How to Connect WH66/WH67
- How to Wear
- How to Use
- How to Manage Calls
- Yealink USB Connect
- How to Change Settings on WH62/WH63
- How to Change Settings on WH66/WH67
- Optional Accessories
- Support
| How to Change Settings on WH66/WH67 | 52
For UC version:
Go to > Settings > Advanced Settings to access the basic settings menu.
General Settings
Wireless Range
Select the wireless range between the headset and base.
• Long: the wireless range is up to 150m.
• Medium: the wireless range is up to 30m.
• Short: the wireless range is up to 10m.
Voice Announcements Enable/disable the paired headset to play voice announcements.
USB Computer Audio This setting determines when your headset receives audio from a
connected PC.
Default: Instant.
• Instant: To have the audio (not call audio) turned on instantly.
• Delayed: To have the audio (not call audio) turned on automatically
with a brief delay. The delay will filter out short notifications sounds
from the PC.
• Never: To never have audio (not call audio) in the headset.
• Always: to always have audio in the headset, this will affect the
battery life.
Music Mode
Enable/disable to optimize audio for music. Disable music mode to
optimize battery performance.
Default: On
Note:
• Audio quality for calls is not affected by this setting.
• Enable the music mode will affect the deployment density. For
more information about deployment density, refer to Yealink WH6X
Deployment and Density White paper.
• After you pair multiple headsets on the base, the music mode is
automatically disabled, the sound quality is switched to the call mode
sound quality.
• Only WH62/WH66 support. The dual headsets support stereo audio,
the side with microphone is for R.
Mute Reminder Enable/disable the paired headset to play a periodic audio reminder when
the microphone is muted.
Note: The detection mechanism of microphone mute status:
• Headset mode: If the microphone boom-arm is moved down (only
for WH62/WH66) and the headset is in the mute status during the
call, the headset will play a "Muted" audio reminder when the interval
between two sound sources detected by the microphone exceeds 5
seconds.
• Speakerphone mode (only for WH66/WH67): The base will play a
"Muted" audio reminder when the interval between two sound sources
detected by the microphone exceeds 5 seconds.