User Guide

| Basic Settings of Teams Room Systems | 25
2.
Enter the administrator password (default: sfb) to access the Setup screen.
3.
In the Features setting page, enable Dual Monitor Mode.
4.
Tap Save and Exit.
Content Sharing
You can present the content while the device is idle or during a meeting.
•
Wired Content Sharing
•
Wireless Content Sharing
Wired Content Sharing
After the MShare is connected to the PC, you can use MShare for wired content sharing.
Procedure
Do one of the following:
• From the idle screen, tap Present to start content sharing.
• During a meeting, tap Present to start content sharing with the participants.
Wireless Content Sharing
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. Before content sharing, you
should pair the WPP20 with the MShare and then connect it to the computer.
•
Pairing the WPP20 with the MShare
•
Sharing Content via WPP20
•
Stopping Sharing Content via WPP20
Pairing the WPP20 with the MShare
Procedure
1.
Connect the WPP20 to the USB port of the MShare.
2.
Wait for about 3 seconds, the WPP20 LED indicator glows solid green.