User Guide

| Basic Settings of Teams Room Systems | 26
The WPP20 is paired with the MShare successfully.
Sharing Content via WPP20
Procedure
1.
Make sure the WPP20 wireless presentation pod is connected to your computer.
2.
Do one of the following:
• On the WPP20, press the presentation button to share the full screen.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Select the file or
window you want to share and then click Share Now.
• On the Yealink Wireless Presentation Pod software, click Contents Share and choose the file you want to
share, and then click Share Now.
The content you want to share is automatically projected to the device.
Stopping Sharing Content via WPP20
Procedure
Do one of the following:
• On your computer, remove the WPP20.
• On the WPP20, press the presentation button.
• On the Yealink Wireless Presentation Pod software, click Stop Sharing.
Tip:
• You can tap Stop Present to stop sharing content when the device is idle.
• During a meeting, tap Stop Presenting to stop sharing content with the participants.
Controlling UVC80/UVC50 Camera Position
Procedure
1.
Tap to enter the Camera Control page.
2.
Tap / to zoom camera out/in.
3.
Tap the arrow keys to pan/tilt the camera.
Resetting UVC80/UVC50 Camera to Home Position
Procedure
1.
Tap to enter the Camera Control page.
2.
Tap Reset.