User Guide

| Troubleshooting | 28
Enabling Automatically Windows Update
Procedure
1.
Navigate to > Settings.
2.
Enter the administrator password (default: sfb) to access the Setup screen.
3.
Navigate to Windows Settings > Go to Admin Sign-in.
4.
Select Administrator from the bottom-left corner and then enter the administrator password.
5.
Tap the button , and then go to Settings > Upgrade & Security > Windows Update, and select Advanced
options.
6.
Enable Automatically download updates, even over metered data connections(charge may apply).
Manually Windows Update
Procedure
1.
Navigate to > Settings.
2.
Enter the administrator password (default: sfb) to access the Setup screen.
3.
Navigate to Windows Settings > Go to Admin Sign-in.
4.
Select Administrator from the bottom-left corner and then enter the administrator password.
5.
Do one of the following:
•
Long tap the button and then select Device Manager.
Select the desired device and then long tap the device to select Update driver.
Select a desired way to update.
•
Tap the button , and then go to Settings > Upgrade & Security > Windows Update, and select Check for
updates.
Select the desired device and then complete the installation.
General Issues
•
Does the MVC500/MVC800 Come with All the Necessary Software Pre-installed?
•
The Room Is Not Enabled for Teams Meetings
•
There Is No Content Displayed on the Second Display
•
Why Can not Click Finish After Completing the Setup Wizard?
•
Any Anti-virus Software Needed to Be Installed on the Mini-PC?
Does the MVC500/MVC800 Come with All the Necessary Software Pre-installed?
The MVC500/MVC800 comes with factory imaged Windows 10 IoT and installed with all the necessary software.
The only customer requirements are Teams, Skype for Business or Lync credentials to run on the MVC. For more
information, refer to Microsoft Teams Rooms.
The Room Is Not Enabled for Teams Meetings
You should enable Teams meeting mode on your system before using the Teams meetings.