SIP-T40G - User Manual
Table Of Contents
- About This Guide
- In This Guide
- Summary of Changes
- Changes for Release 81, Guide Version 81.20
- Changes for Release 81, Guide Version 81.15
- Changes for Release 81, Guide Version 81.5
- Changes for Release 80, Guide Version 80.95
- Changes for Release 80, Guide Version 80.80
- Changes for Release 80, Guide Version 80.60
- Changes for Release 80, Guide Version 80.20
- Changes for Release 80, Guide Version 80.10
- Changes for Release 73, Guide Version 73.16
- Changes for Release 72, Guide Version 72.2
- Changes for Release 72, Guide Version 72.1
- Changes for Release 71, Guide Version 71.180
- Changes for Release 71, Guide Version 71.150
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- General Settings
- Audio Settings
- Contact Management
- Call History Management
- Search Source List in Dialing
- System Customizations
- Basic Call Features
- Advanced Phone Features
- Regulatory Notices
- Appendix
- Index
User Guide for the SIP-T46G IP Phone
60
To configure key tone via phone user interface:
1. Press Menu->Basic->Sound->Key Tone.
2. Press or , or the Switch soft key to select Enabled or Disabled from the Key
Tone field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key tone is configurable via web user interface at the path Features->Audio.
BLF Ring Type
You can specify a desired ring tone to play for BLF pickup on the phone. This allows the
monitoring phone to play a specific ring tone when the monitored line receives an incoming call.
To use this feature, you need to enable visual and audio alert features in advance. For more
information, refer to Configuring Visual and Audio Alert for BLF pickup on page 164.
To configure BLF ring type via phone user interface:
1. Press Menu->Basic->Sound->BLF Ring Type.
2. Press or to select the desired ring tone.
3. (Optional.) Press to adjust the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
BLF ring type is configurable via web user interface at the path Features->Call Pickup.