ZVC400- User Guide

Controlling UVC40 Camera Position

Procedure

Setting UVC40 as Default Microphone, Speaker and Camera

1. Tap Settings on the touch screen.

2. Disable Lock Settings.

You need to enter the room password to change the setting.

3. Tap the Microphone field and then select Echo Cancelling Speakerphone (Yealink UVC40 Audio)

as your audio input device from the SOURCE field.

4. Tap the Speaker field and then select Echo Cancelling Speakerphone (Yealink UVC40 Audio)

as your audio output device from the SOURCE field.

5. Tap the Camera field and then select Yealink UVC40 Camera as your default camera from the

SOURCE field.

Procedure

Signing Into Your Zoom Rooms Account

Procedure

1. Tap Sign In on the Meet Now screen.

2. Enter the email and password.

3. Tap Sign In.

Signing Out of Your Zoom Rooms Account

Procedure

1. Tap Settings on the touch screen.

2. Navigate

to Room->Sign Out.

If the Lock Settings is enabled, enter the room password and then tap OK.

Wireless Sharing

You can use Yealink WPP20 wireless presentation pod for wireless content sharing.

WPP20 needs to be purchased separately.

Make sure the MTouch Ⅱ is connected to the MCore.

Procedure

1. Connect the WPP20 to the USB port of the MTouchⅡ.

2. Wait for about 3 seconds, the WPP20 LED indicator glows

solid green.

The WPP20 is paired with the MTouchⅡ successfully.

3. Connect the WPP20 to the PC.

WPP20

Wireless Presentation Pod

Tap Camera Control during a meeting.

2. Tap or to zoom camera in/out.

3. Tap the navigation keys to pan/tilt the camera.