Installation guide

MyPBX U5XX Administrator's Guide

www.yeastar.comPage52

·spy modes

There are 4 spy modes available for choice:

General spy: you have the permission to use the following 3 modes.

Normal spy: you can only hear the call, but can't talk

Whisper spy: you can hear the call, and can talk with the monitored extension

Barge spy: you can hear the call and talk with them both

Note: for example,if 500 want to monitor extension 501, we need to enable the

'allow being spied ' for 501, and choose the spy mode for extension 500.

Then pick up 500 and dial “feature codes + 501” to start monitoring when 501

is in a call

If 500 choose „normal spy‟, it should dial‟*90501‟ to start monitoring;

If 500 choose „whisper spy‟, it should dial „*91501‟ to start monitoring;

If 500 choose „barge spy‟, it should dial „*92501‟ to start monitor;

If 500 choose „general spy‟, it can dial „*90501‟,‟*91501‟ or „*92501‟ to start

monitor.

6.1.2 Phone Provisioning

The Auto Provision sub menu provides users a method to Auto Provision IP

Phone after the Express Setup process.

Note: Auto Provision functions fully test with these models:

Yealink (T12, T18, T20, T22, T26, T28, T32, T38, VP530, VP-2009)

Snom (300, 320, 360, 370)

Polycom (IP 6000, IP 7000, IP 32X, IP33X, IP430, IP450, IP550, IP560,

VVX1500)

Cisco (IP7940, IP7960)

Aastra(9480i, 9480i-CT, 6730i, 6731i, 6753i, 6755i, 6757i, 6757i CT, 6737i)

GrandStream(GXP1450, GXP2100, GXP2110, GXP2120)

Escene(ES220, ES320, ES330, ES410, ES620)

Fanvil(C56, C58, C60, C62)

News:

When provisioning Yealink, Grandstream, Fanvil, Snom IP phone,

MyPBX is not needed to be set as the only DHCP server any more.