NeoGate TA FXS Gateway Quick Installation Guide NeoGate TA FXS Gateway Quick Installation Guide Version: V1.0 Yeastar Technology Co., Ltd. Date: June 9th, 2014 http://www.yeastar.com Downloaded from www.Manualslib.
NeoGate TA FXS Gateway Quick Installation Guide Contents 1. Preparation before Installation.................................................... 3 2. Hardware Specifications ........................................................... 4 2.1 Overview ............................................................................................................................................................. 4 2.2 LED Indicators and Ports ..........................................................................
NeoGate TA FXS Gateway Quick Installation Guide About NeoGate TA Series Analog VoIP Gateway NeoGate TA Analog VoIP Gateways are cutting-edge products that connect legacy telephones, fax machines and PBX systems with IP telephony networks and IP-based PBX systems. Featuring rich functionalities and easy configuration, NeoGate TA is ideal for small and medium enterprises that wish to integrate a traditional phone system into IP-based system.
NeoGate TA FXS Gateway Quick Installation Guide 2. Hardware Specifications 2.1 Overview Figure 2-1 NeoGate TA FXS Gateways http://www.yeastar.com Downloaded from www.Manualslib.
NeoGate TA FXS Gateway Quick Installation Guide 2.2 LED Indicators and Ports The LED indicators and ports of NeoGate TA Series are straightforward. Take the front panel and rear panel of NeoGate TA800 and NeoGate TA3200 as examples. Front Panels POWER LAN RUN FXS Ports Status WAN (Reserved) Figure 2-2 NeoGate TA800 Front Panel FXS Ports Status RJ11 FXS Ports Figure 2-3 NeoGate TA3200 Front Panel http://www.yeastar.com Downloaded from www.Manualslib.
NeoGate TA FXS Gateway Quick Installation Guide Rear Panels LAN Port Power Inlet FXS Ports RESET WAN Port (reserved) Figure 2-4 NeoGate TA800 Rear Panel LAN Port Power Inlet POWER RESET RJ21 FXS Ports Protective Earth RUN CONSOLE Power Switch Figure 2-5 NeoGate TA3200 Rear Panel http://www.yeastar.com Downloaded from www.Manualslib.
NeoGate TA FXS Gateway Quick Installation Guide LED Indication Status On POWER Power status RUN NeoGate status 1-32 FXS Ports Status Off Blinking Not Blinking/Off Description The power is switched on. The power is switched off. NeoGate is running properly. NeoGate goes wrong. Solid green: the port is idle. Green light blinking: there is an ongoing call on the port.
NeoGate TA FXS Gateway Quick Installation Guide 3. NeoGate TA Series Installation To avoid unexpected accident, personal injury or device damage, please read the following instructions before installing the Gateway. 3.1 Placement Instructions Ambient Temperature: to avoid overheating, please do not run NeoGate TA Series in the place where the ambient temperature is above 122°F (50°C). Ventilation: please make sure that the device has good ventilation around.
NeoGate TA FXS Gateway Quick Installation Guide 3.2.3 Power Connection Connect the power adapter to the Gateway’s power port, and then plug the power adapter into an electrical outlet. Press the On switch to power on the Gateway. The gateway will start booting. In the meantime, users would see that the “POWER” and “RUN” indicator lights turn on. Please switch off the power before plugging or unplugging the cables. 3.2.
NeoGate TA FXS Gateway Quick Installation Guide 4. NeoGate TA Series Basic Configurations 4.1 Getting an IP Address NeoGate provides web-based configuration interface for administrator and account user. The user can manage the device by logging in the Web interface. NeoGate TA FXS Gateway uses DHCP to pick up an IP address. Use an analog phone connected to the FXS port of the Gateway, press *** to get into the IVR menu. Enter 1 to obtain the Gateway’s IP address.
NeoGate TA FXS Gateway Quick Installation Guide Enter the Admin User Name and Password to log in. Figure 4-2 NeoGate Admin Configuration Interface Via the configuration interface, the admin can make all the system configurations, including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (time zone, password, etc.); internal settings (Web access port, music on Hold, etc.
NeoGate TA FXS Gateway Quick Installation Guide 2. Outbound and inbound calls Users should be able to make and receive external calls after configuring FXS ports, VoIP Trunk, and dial pattern. Please refer to Administrator’s Guide for details. 4.5 Reset to Factory Defaults To reset to factory defaults, you could follow the below instruction: Press the “RESET” button located in the back panel with a paper clip or a pencil tip. You can see the RUN indicator stops flicker and turns solid.
