System information

NeoGate TE100 Administrator Guide
www.yeastar.com Page 39
Define the expected DID Number if this trunk passes DID on incoming calls. Leave this
field blank to match calls with any or no DID info. You can also use pattern matching to
match a range of numbers.
DID Associated Number:
Define the extension for DID number. This field is only valid when you use BRI, SIP, SPS
or SPX trunk for this inbound router. You can only input number and „-„in this field, and
the format can be xxx or xxx-xxx. The count of the number must be only one or equal the
count of the DID number.
Handle matched incoming calls:
choose the trunk or trunk group to route the incoming calls to.
Outbound Dial Pattern
Outbound calls that match this dial pattern will use this outbound route. There are a
number of dial pattern characters that have special meanings:
X: Any Digit from 0-9
Z: Any Digit from 1-9
N: Any Digit from 2-9
[12345-9]: Any digit in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
The „.‟ Character will match any remaining digits. For example, 9011. will match any
phone number that starts with 9011, excluding 9011 itself.
The „!‟ will match none remaining digits, and causes the matching process to complete as
soon as it can be determined that no other matches are possible.
Example 1: NXXXXXX will match any 7 digits phone number.
Example 2: 1NXXNXXXXX will match a phone number starting with a 1, followed by a
3-digit area code, and then 6 digit number.
Strip digits from front before dialing
Allows the user to specify the number of digits that will be stripped from the front of the
phone number before the call is placed. For example, if users must press 0 before dialing
a phone number, one digit should be stripped from the dial string before the call is
placed.
Prepend these digits before dialing
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10 digit dialing, but users are more comfortable with 7 digit
dialing, this field could be used to prepend a 3 digit area code to all 7 digit phone
numbers before calls are placed.