User's Manual
14
Installation of Rear Cam
※
If there is a lm attached to the rear windshield.
Simply cut o the lm at the mounting position and attach the rear cam.
※
Installation of the rear cam may be dicult depending on the vehicle model (such as
vehicles with vertical rear doors).
※
Please note that wiring the rear cam near the radio antenna may reduce the sensitivity
of the radio.
Wipe the rear windshield clean.
Attach the electrostatic lm.
Tear o the paper from the electrostatic lm's
adsorption sheet side.
Use a commercially available cleaning cloth to wipe the rear glass
clean of dirt and grease.
Attach the electrostatic lm to the rear windshield at the position where
you decided to install the rear cam.
※
If there is dirt or dust on the windshield, or the electrostatic lm is
repeatedly removed, the adsorption strength will decrease and the
cam may fall while driving.
1. Attach the electrostatic lm
1-1
1-2
1-3