2. Operating and Programming/2.3 edify App Io enjoy aif available features, # Is recommended to contra] your Robot via the yes! App. Boors you start, masks sure they = Your mobile phone is connected to a WI-Fi network, » The 2.4GHz band wireless signal is enabled on your router. # The WI-Fi indicator light on Rootkit is slowly lashing.
.4 Start, Pause, Wake Up, Power Off £3 wake Pres the AUTO button on Robot to wake B up & Power OFF #ote: The robot's Control Panel stops glowing after the robot Is paused for a fow minutes. Press the AUTO Mods Button on Robot to ‘wake up the robot. Hate: When Robot is not working, it is recommended to keep it switched ON and charging.
2.5 Mopping System Iota 1. To prolong the servos Ife of the reservoir, | is recommended to uss outed water or softened water for the mopping system. 2. if you need to clan the came, please uninstall the Mopping Pad Plate first. 3. Empty the reservoir after Robot finishes mopping.
. Maintenance Mopping System Before performing cleaning and maintenance tasks on Robot, tum the robot OFF and unplug the Docking Station.
4. Maintenance Dust Bin and Filters Dust Bin Mode: 1. Please rinse the filter with water as shown above. 2. Do not use finger or brush to clean the filter. 3. Be sure to dry out the filter for at least 24 hours after washing.
2. Maintenance Main Brush, Edge Brush and Mapping Sensor Note: A Multi-Function Cleaning Tool Is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.
4. Maintenance Other Components Iota: Before cleaning the robot's Charging Contacts and Docking Station Pins, turn the robot OFF and unplug the Docking Station.
4.
4. Indicator Light Robot Robot will iol you something is Wong with an indicator ght and voles repel. Moms detailed support is available through the yessed app and online website. Indicator Light Impresario AUTO Mode Button glows a solid WHITE. “The robot is cleaning. The robot is paused while cleaning. ALT Mode Button flashes WHITE. The robot ls charging. The robot is starting. The robot is relocating. AUTO Mode Button glows a solid RED, The robot hes low battery, AUTO Mode Button flashes RED.
&. Troubleshooting Troubleshooting the home WIFI network. signal. No, Malfunction Posse Causes Solutions Incorrect home WI-Fi amusement or password | po yg comet home WI-Fi username and password. Robot Is not able to connect to Robot Is not within range of your home WIFI | Make sure Robot Is within range of your home WIFI signal. Network setup started before Robot was ready. Tum ON Power Switch. Press the RESET Button for 3 seconds.
No. Malfunction Possible Causes ‘Solutions The Docking Station Is not correctly placed. Refer to section 2.2 to correctly place the Docking The Docking Station is disconnected or Please check if the Docking Station is connected to maced. power. Do not move the Docking Station manually. 3 Bern tithe Robot Is working In a dark environment. Aka sure to uss Robot In & wall illuminated environment. Robot Is paused for moral than 60 minutes. Av old pausing Robot for over 60 minutes.
No, Malfunction Poss bis Causes Solutions The water Inlet filter on the bottom of Unscrew the water Inst on the bottom of Reservoir and Reservoir Is clogged. clean the filter. The water is not coming out of 7 | the Reservoir when Robot is The Reservoir runs out of water. Add water into the Reservoir. mopping. eer ets on the pitta of Rao aS | Chalk the water outlets on the bottom and clean. ‘The reservoir drops out of LL . The reservoir is properly installed when it clicks into 8 place during cleaning.
&. Troubleshooting/8.2 WI-Fi Connection Ha fore WI-Fi setup, make sure Robot, mobile phone, and WI-Fi network mast the flowing requirements, Robot and Mobile Phone Requirements = Robot is fully charged and the power switch of Robot is turned on. = WI-Fi status light slowly flashes. « Turn aff Mobil phone's pellucid data (you can turn it back on after setup). WI-Fi Network Requirements * You are using a 2.4GHz or 2.4/5 GHz mixed network, « Your router supports and VIP protocol.
6. Product Specifications Model DVX34 Rated Input 20v== 1A Docking Station Model Chichi Chigger* Rated Input 100-240V ~ 50-80Hz 0.54 Rated Input 120V~ 50-60Hz 8A Rated Output 20v == 1A Rated Output (Charging) 20V===1A Here: Technical and design specifications may be changed for continuous product improvement. *CH1918 is an Self-empty Station sold separately that automatically empties your Robot's dustbin. Explore more accessories at hiips/fuw comedic.
Consignes de sécurité importantes INSTRUCTIONS IMPORTANTES EN MATIÈRE DE SÉCURITÉ LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER CET APPAREIL. CONSERVER CES INSTRUCTIONS Pour usage domestique seulement Lors de Utilisation d'un appareil! électrique, il faut toujours suivre les précautions de base, notamment AVERTISSEMENT : Assurez-vous de lire tous les avertissements et toutes les instructions de sécurité.
