1. Before You Begin What In the Box: 1x 24W BERG LED Par Lights 1 x Brackets 1 x Remote Control 2 x Knobs & Screws 1 x User Manual Unpacking Instructions: Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Amazon customer support team sure will definitely help you with this. You may contact Amazon customer support team on the below link: tus If your order is urgent, here are Amazon customer service phone numbers as well: U.S. and Canada: 1-866-216-1072 If no response from Amazon, you can ask seller customer service directly: Disclaimer: Yemenite believes that the information contained in this manual is accurate in all respects.
omissions result from negligence, accident or any other cause. Yemenite reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Yemenite has no obligation to make, and does not commit to make, any such revisions. Safety Notes: Please read the following Safety Notes carefully before working with the product. Than Notes include important safety information about installation, usage and maintenance.
Never disconnect the product from power cord by pulling or tugging on the cord. If mounting the product overhead, always secure to a fastening device using a safety cable. Make sure there are no flammable materials closet the product when operating. Do not touch the product's housing when operating because it may be very hot. Always make sure that the voltage of the outlet to which you're connecting the product is within the range stated on the decal or rear panel of the product.
or any moving part. Always use the hanging/mounting bracket. The Max ambient temperature (Ta) is 104° not operate the product at higher temperature. In the event of a serious operating problem, stop using the product immediately. Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the seller customer service.
3. Setup: AC Power: The 24W BERG BLED Par Lights has an auto ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product's power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product's back panel, or refer to the product's specifications chart. The listed current rating indicates the product's average current draw under normal conditions.
Orientation : The 24W BERG LED Par Lights may be mounted in any position; however, make sure adequate ventilation is provided around the product.
4. Operation: Control Panel Operation: To access the control panel functions, use the four buttons surrounding the display.
Disconnected: Set the product in DMX mode /d001 te control with a DMX controller. Connect the product to a suitable power outlet Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
Menu Map Mode Programming Description Steps Selects the DMX DMX 8CH | ADD 1-A512 lit and Function personality an starting address Static Colors Au-Au1s Selects static color pulse EEK-Ee99 Selects hopping Jump FF01-FF99 program speed (slow to fast) Auto Repeat Play Jump AUTO Fade Strobe Programs Pulse Selects color Coco-CCog Lo combination Fade Changing | CCO01-CC99 Selects color ) combination speed (flash display) {slow to fast)
VOL-vOL9 Sets sound (flash display) sensitivity Sound-Active without Sound Mode Bronson) activated back out brushoff} Auto F000-F255 Selects strobe Strobe Mode | (flash display} speed (slow to fast) Note: Master/Slave Mode setting Choose the Master unit at any modes, DMX out connection, then set the Slave unit at “A001”, DMX in connection, the Slave unit show “Slav” flash status.
DMX Channel Modes, Assignments, and Values 7-Channel Channel Function Value Setting Bright 1 0-255 0to 100% Adjustment 2 Red 0-255 0 to 100% 3 Green 0-255 0 to 100% 4 Blue 0-255 0 to 100% 5 White 0-255 0 to 100% 0-8 No Function Strobe Strobe Speed 8 10-255 Mode (fast to slow) Remarks: CH1 is must on; CH2/3/4 to selector add colors.
No Function 0-50 0to 100% Poplin; Ping 51-99 Mode Fade Mode 100-148 Pulse Mode 150-200 7 Auto Play 201-250 Sound All Modes Activated 251-255 . Changing Mode Note: CH1 is bright adjustable for 2-CH.
Remote Control Operation ON/OFF ~~ {@DMX Mode Fade fade Hopping Mode Mode Sound-active Mods G)Color Red Color ®: i § Blue Color Rose Color @{@ Cyan Color Amber Col White Color (3. @ Amber Color Spearhead& © Speed + 5.TECHNICAL SPECIFICATIONS: LED Typewrite BERG LED Par Lights Power Supply: 100v-240Volts AC / 50-60Hz Power Consumption: 30-Watts Size: 5.12x5.12x5.12in/ 13x13x13 cm Weight: 1.4 Ibs / 0.