User's Manual

12
5.8 P1, P2, P3 Programmable Button
If you push the P button for more than 2 seconds, the P button has two functions of Short Key and
Long Key. The Short Key is set by PC program and Long Key is defined in the body.
If the key input is not 10 seconds, it will be automatically set Key Lock.
If you want to disable the Key Lock function, it is cancelled by pressing the P1 key for more than 2
seconds (Long Key function) and you can use all of the Key.
If the key input is not 10 seconds again, it will be automatically set Key Lock.
If you want to completely release the Key Lock function, you have to OFF the function at the Key
Lock Menu.
P Key Short Key Long Key
P1
Programmable Key Lock ON/OFF
P2
Programmable Flash Light ON/OFF
P3
Programmable Vibration mode ON/OFF
5.9 EAR/MIC Jack
This jack is used to connect external speaker Mic, and headset, etc.
5.10 Micro USB Jack
Features of the micro-USB jack: 1) charging 2) PC Program Function 3) Radio Firmware UP
function.
5.11 LED indication Status
This LED displays the operating status of the device. The main condition inscription is as follows.
① TX : Red Lamp.
② RX : Green Lamp.
③ Green blinks: when the frequency is the same but the color code does not match.
④ Low Battery: Red Lamp blinks with “beep” sound.
5.12 Charging status LED.
The LED indicates the battery charge.