User's Manual

6.6.2 Priority Scan

At the Priority Scan mode, the LCD displays ‘SCAN’ and ‘P-‘ icons. The Radio scans the channel in the

sequence of CH1, P, CH2, P, CH3, … at the priority scan mode. During receiving signal through the

common channel, the Radio scans the priority channel periodically and if the Radio detects the Priority

channel, it starts receiving the channel. During receiving the signal, you can move to the following scan

channel by pressing the UP or DOWN button. If you press the Enter button, you can erase the current

receiving channel temporarily from the scan list and at that time, you can move to the next channel.

But in the course of receiving the Priority channel signal, you can not change or erase

the channel by the UP/DOWN buttons(▲,▼).

6.7 Key Lock function

During pressing the “Enter” button at the receiving standby mode, press the "▲" button within 0.5second

and then, the Key Lock function will be executed and the key icon of LCD will appear. At this situation, the

other key except for the PTT and the Monitor key will not be operated. In order to release the Lock function,

press the " Enter " button and during pressing the button, press the "▼" button within 0.5second.

6.8 2TONE / 5TONE function

6.8.1 2TONE

You can use the private and group tone functions by the central control system which is using the 2TONE

SIGNALLING. If the Radio receives the tone signal, the Radio will make a Beep sound which is advising the

tone signal status and which means the Radio is ready to talk.

6.8.2 5TONE

At the tone mode, you can make the private & group calls by the 5TONE and each call memory has the call

IDs up to 30 numbers. The set-up of call memory and 5-TONE is made by PC programming. If pressing the

“Enter” button for 2seconds at the general mode, the Radio is converted to the call mode and if pressing the

"P(Program-MENU)" button for 2seconds at the call mode, the Radio is converted to the general mode. By

using the channel buttons (▲,▼) at the call mode, the call number of a channel which is available for the call

is displayed.

Figure 6-6) General Mode Figure 6-7) Call Mode