User's Manual

7
4.2 Installation and Removing the Battery
4.2.1 Installation of the battery
-. To install battery, slide up the battery towards the top of the radio until battery latch is locked.
4.2.2 Removing the Battery
-. Slide the battery latch located on the bottom of radio to the open position as shown in Figure 4-2.
-. The battery is removed by pressing it against and sliding it towards the bottom of the radio
Figure 4-2) Installation and Removing the Battery
4.3 Installation and Removing the Belt Clip
- To attach belt clip to radio, align belt clip rails with the grooves in radio and slide the belt clip onto the
mounting rails until it latches into place.
- To remove belt clip from radio, push up on tab of belt clip with flat bladed screw driver and at the
same time, slide the belt clip towards the top of Radio figure 4-3).
Figure 4-3) Installation and Removing the Belt Clip