User's Manual

By Pressing UP (▲) or DOWN (▼) button, set Beep tone on or off. To exit from menu, press M

button or PTT button.

6.8.4 DTMF tone selection:

Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.

Press Menu (P) button 4 times. Radio will go to DTMF setting mode. By pressing UP (▲) or DOWN

(▼) button, and pressing Enter( ) button, you can select 12 different DTMF tones.

To exit from menu, press M button or PTT button.

6.8.5 Call tone selection (10 different call tones):

Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.

Press Menu (P) button 5 times. Radio will go to Call tone selection mode. By pressing UP (▲) or

DOWN (▼) button, and pressing Enter ( ) button, you can select On or Off.

If you select On and press Enter ( ) button, you can select 10 different Call tones by pressing

UP (▲) or DOWN (▼) button. To confirm your setting, please Enter (Icon) button. To exit from

menu, Press M button or PTT button. To enable Call, press Call/Enter( ) button.

Reminder : To receive Call tone, the receiving radio needs to be on the same channel and tone

settings.

6.8.6 Roger Beep On/Off selection:

Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.

Press Menu (P) button 6 times. Radio will go into Roger beep on/off setting mode.

By pressing UP (▲) or DOWN (▼) button will select on or off. To confirm your selection, press

Enter ( ) button.

To exit from menu, press M button or PTT switch.

6.8.7 Squelch level selection:

Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.

Press Menu (P) button 7 times. Radio will goes into Squelch level selection mode.