User's Manual

21.5” Windows optical bonding touch pc
Insert an RJ45 cable into the ETHERNET port labeled with RJ45, after taking off the lid. Please use
only a Cat7 (shielded twist pair Type) cable for the connection. (10/100 Mbps)
Connecting an RS232 cable
Please note that the color, shape and other appearance of the parts may differ from the images below.
Specifications are subject to change without notice to improve the overall quality of the product. The
connection parts may differ in different products.
Insert the cable into the port labeled as RS232, after taking off the lid.
Connecting an RS485 cable
Please note that the color, shape and other appearance of the parts may differ from the images below.
Specifications are subject to change without notice to improve the overall quality of the product. The
connection parts may differ in different products.
Insert the cable into the port labeled as RS485, after taking off the lid.
First Steps
Turning the product on
In order to turn on the product, connect the device to power and then press the Power button. Please
make sure that the power switch is always turned off when connecting the mains power!
Powering the product off
In order to power off the product, please press the red power switch in the off position and unplug the
power once not needed.
Powering the product off
1. In order to power off the product, please tap the Windows Icon in the lower-left corner of
the screen to enter the Windows Start screen.
Page | 11