User's Manual

21.5” Windows optical bonding touch pc
Installation
Warnings!
- DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE
PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. This can result in a
fire.
- Do not install the product in spaces that are poorly ventilated or completely enclosed, to avoid
an increased internal temperature as this may cause fire.
- When installing the product, keep it at a distance from the wall to allow sufficient ventilation
and to avoid an increased internal temperature as this may cause fire.
- Keep any plastic packaging out of reach of children, as they are in danger of suffocating on
plastic.
- Do not install the product on any unstable, insecure or vibrating surfaces, to avoid the product
from falling and becoming damaged and/or causing injuries. Excess Vibration can damage the
product or cause fire.
- As the product is heavy, install it on a flat and stable surface.
- Precautions during installation and storage
Caution!
- The product shall not be dropped while moving, as this may result in product damage or
failure or personal injury.
- Do not lay down the product on its front, to prevent the screen from becoming damaged.
- Set down the product gently, to avoid potential product failure or personal injuries.
- In case of installation in unusual locations, the surrounding environment may cause serious
problems in quality. Please contact customer service before installation. Among unusual
locations are places where many fine dusts are generated, places where chemicals are used,
places with too high or low temperatures, places with a lot of moisture or water and
transportation equipment such as vehicles.
Operation
Warnings!
- Never open, disassemble, repair or modify the product by yourself. The high voltage inside the
product can lead to electric shocks or fires. Please contact the customer service for questions
and repair services.
- Before the product is moved, always disconnect the power cable and all other connected
cables in order to avoid damage to the power cord, electric shocks or fires.
- In case the product produces abnormal sounds, burning smell or smoke, the power cord
needs to be disconnected immediately to avoid risk of electric shocks or fire and the customer
service shall be contacted.
- Do not let children climb onto the product or hang from it, as they could become injured or
seriously harmed.
- Never leave heavy objects etc. on top of the product. If reached for, the objects may fall and
cause serious injuries.
- If the product was dropped or the outer casing is damaged, please disconnect the power cord.
Do not continue the use of the product as this may result in an electric shock or fires.
o Please contact customer service to receive advice.
- Do not lift or move the product by pulling any cables or the power cord as this can result in
product failure or damage, electric shocks or fires from damaged cables.
- Do not drop objects or apply impact onto the product to avoid electric shocks or fires.
- In case of gas leakage, do not touch the product or the power plug as sparks can easily cause
explosions or fire. The area should be ventilated immediately.
- Do not keep or use combustible sprays or inflammable substances close to the product to
avoid explosions or fires.
Page | 5