User's Manual

21.5” Windows optical bonding touch pc
- Do not insert any objects into the product (fans, ports, etc.) especially ones that burn easily
(cardboard, paper, matches, cloth, etc.) or are metallic (coins, hairpins, needles, nails, etc.).
o In case of foreign substances, objects or water having entered the product, please
disconnect the power cord to avoid product failures, damage, electric shock or fires
and contact customer service.
- Do not insert your fingers into the fans or other parts of the product as product failure or
personal injuries may occur.
Caution!
- Leaving the screen fixed on a stationary image for an extended period of time may cause
defective pixels or afterimage burn-in. Activating the power-saving mode or a screen saver
with a moving picture if the product will not be used for an extended period of time is
important.
- If you plan to not use the product for a longer period of time (holidays, vacations, etc.), please
disconnect the power cord from the power socket as accumulated dust and heat can cause
electric shocks, leakage or fires.
- The product has to be used at the recommended resolution and frequency to avoid
deterioration of your eyesight.
- Looking at the screen too closely for an extended period of time can result in deterioration of
eyesight.
o For every one (1) hour of using the product, rest your eyes for more than five (5)
minutes, to relieve eye fatigue.
- Be cautious when adjusting the product position as excessive tilting of the product may result
in the product falling and potentially injuring somebody or causing product damage.
- Heavy objects shall not be placed on the product as this may cause product failure or personal
injuries.
Opening the device
The device must not be opened at any times to avoid injuries and product damage.
Preparations
Components
Please find a list of the delivered components below:
- Display
front view
Page | 6