User's Manual

21.5” Windows optical bonding touch pc
Ports and Buttons
Parts
Description
Power button
Power button.
Press to power up or enter the standby/shutdown mode or
press and hold for 6 seconds to switch the product on or off.
The 6 second long press should only be used in case of full
Windows operating system non-responsiveness for at least
15 minutes. Otherwise ALWAYS USE THE SHUTDOWN
SEQUENCE OF WINDOWS OPERATING SYSTEM!
FAILURE TO DO SO MAY CAUSE DAMAGE TO THE
DEVICE.
Main Power
The red button is used for powering on the device.
Parts
Description
Power
Power cable port
HDMI
Via the HDMI port an external monitor can be connected,
using an HDMI cable.
4x USB
Connect to a USB storage device, wired keyboard or mouse.
2x RJ45
Via the RJ45 or Ethernet port the device can be connected to
the internet.
Line_out
Connect to an audio source e.g. speakers via an audio cable.
Parts
Description
Antennas:
1. Wi-Fi
One (1) Wi-Fi antenna to provide a wireless LAN connection.
Page | 8