User's Manual

21.5” Windows optical bonding touch pc

Parts Description

2x USB 3.0 Connect to a USB storage device, wired keyboard or mouse.

RS232 Serial port RS232

RS485 Serial port RS485

Before Installing the Product (Installation Guide)

IMPORTANT:

 Please note that the device must be installed so that it must not face direct sunlight!

In order to prevent damage to the product or personal injuries, this product must be attached securely

according to the installation instructions.

- Installation of the wall or floor mount shall be handled by an authorized installation company,

to prevent the risk of a falling device which could lead to personal injuries or product damage.

Installation on a Perpendicular wall

The minimum distance between the surface of a perpendicular wall and the installed product must be

at least 50 mm in order to allow enough room for ventilation!

Installation on an Indented Wall or enclosed space

Only install the product on an indented wall or enclosed space if specifically discussed and allowed in

writing by the manufacturer. Please contact the customer service for further information.

The minimum distance between the surface of an indented wall or enclosed space and the installed

product must be at least 50 mm on all sides in order to allow enough room for ventilation!

The product must not be installed in an enclosed cabinet that has not been pre-approved by the

manufacturer.

The ambient temperature has to be kept under 40 degrees Celsius.

Please do not block the fans on the product or insert any objects or fingers.

Connections

Before Connecting

Pre-Connection Checkpoints

- Please read the user manual of each source device before connecting it with the product. The

amount and the locations of ports on the source devices may differ between devices.

- Only connect the power cable once all connections are completed. Connecting the power

cable during the connection process can lead to damage to the product.

- Please check the different types of ports that you want to connect at the side or the back of

the product.

Page | 9