User's Manual

27” Semi Outdoor touch tablet, Type B
Before Using the Product
Safety Precautions
Please be careful when handling this device and follow all the instructions, warnings and caution
notes. If instructions are not followed a serious or fatal injury or damage to properties may result.
Cleaning
Take care when cleaning the product as parts may become loose, disconnect or get scratched.
Please only use the following products when cleaning:
Use a dry microfiber cloth. Cleaning solutions should be alcohol based, non-staining detergents and
must not be solvents like acetone.
Storage
The product shall be stored within the temperature range of -5°C and +40°C at 10 - 70 % relative
humidity. Please do not store below or above the limits of the temperature range.
Electricity and Safety
Electrical installation etc.
Warnings!
- Never use a damaged power cord or plug, nor a power socket that is loose. This might result
in fire or an electric shock.
- Do not use multiple products with a single power socket, as this may lead to overheated
power sockets which may cause fire.
- Do not touch the power plug with wet hands. Otherwise, an electric shock may be the result.
- Always insert the power plug all the way to avoid it being loose. Insecure connections can
cause fire.
- Always connect the power plug to grounded power sockets (type one insulated devices only),
as otherwise injuries or electric shocks may result.
- Never bend the power cord or pull it with force. Furthermore, do not leave the power cord
under heavy objects. These may cause damage to the cord, which can lead to a fire or electric
shock.
- Do not place the product or power cord close to heat sources, as this may lead to fire or an
electric shock.
- Any dust or dirt around the pins of the power plug or the power socket should be cleaned with
a dry cloth to avoid a risk of fire.
Caution!
- Do not disconnect the power cord or cut power to the product while the product is running and
being used. This can cause an electric shock or cause damage to the product.
- Only use the power cord provided by the manufacturer of this product. Do not use this
product’s power cord with other products. This can cause an electric shock or fire.
- Make sure to keep the power socket where the power cord is connected unobstructed.
o If an issue occurs, the power cord must be disconnected to cut off the power to the
product.
o Please note that the product is not completely turned off by only using the power
button.
- When disconnecting the power cord from the power socket hold the plug, as an electric shock
or fire may result otherwise.
Page | 4