Owner manual

2910-114 HD LIQUID FERT. KIT, 2910

Key Qty. Part No. Description

1 1 2502-292 1/2-13 X 1 HHCS Gr. 5 ZP

2 1 2995-301 Injector Mount Plate

3 1 2995-320 Spacer, Injector

4 1 2910-321 HD Injector Arm 2910

5 5 2525-352 1/2 Med. Lockwasher ZP

6 4 2520-352 1/2-13 Hex Nut ZP

7 2 2526-351 1/2 Std. Flatwasher ZP

8 1 2570-736 1/2 X 3-1/8 X 2-1/4 U-Bolt ZP

9 1 2995-212 Injector Rod W.A., 1/2-13

10 1 2515-311 3” Nipple, 1/4 NPT Stainless Steel

11 1 2520-356 1/2-13 Jam Hex Nut

12 1 2995-131 Injector Spring Assembly

13 2 2502-317 1/2-13 X 1-3/4 HHCS Gr. 5 ZP

YETTER MANUFACTURING CO.

FOUNDED 1930

Colchester, IL 62326-0358

Toll free: 800/447-5777

309/776-3222 (Fax)

Website: www.yetterco.com

E-mail: info@yetterco.com

PAGE 1
2910-114 HD LIQUID FERT. KIT, 2910 Key 1 2 3 4 5 6 7 8 9 10 11 12 13 Qty. 1 1 1 1 5 4 2 1 1 1 1 1 2 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com Part No. 2502-292 2995-301 2995-320 2910-321 2525-352 2520-352 2526-351 2570-736 2995-212 2515-311 2520-356 2995-131 2502-317 Description 1/2-13 X 1 HHCS Gr. 5 ZP Injector Mount Plate Spacer, Injector HD Injector Arm 2910 1/2 Med.
PAGE 2
910-114 HD LIQUID FERTILIZER KIT 1. Mount HD injector arm (#4) to the coulter arm using a 1/2 x 3-1/8" x 2-1/4" u-bolt, two flatwashers, lockwashers and nuts as shown. Location of the u-bolt on the coulter arm will effect the depth that the injector rod w.a. operates. 2. Assemble the 3" stainless steel nipple (#10) to the injector rod w.a. (#9). NOTE: A female hose barb (not supplied) will be required. Also a straight stream nozzle 1/4 NPT male thread will be required (not supplied).