User Manual 80T
Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment . FCC- Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a communications.
Chapter 1: Product Introduction 1. Product Features Besides the main function-GPS navigation, 80T-1 supports Wi-Fi; Bluetooth, Hands-free with DSP echo-cancellation, DUN and Phonebook; also with strong 3D entertainment function as well as Multimedia play function. CPU: SiRF Prima, Dual-Core, ARM11, 600 MHZ, 300 MHZ DSP, 3D hardware acceleration, 64 channels GPS baseband. WinCE 6.0 Operation System 128 MB MDDR Random Access Memory Built-in Flash, external SD card , support SDHC 2.
F: Reset key G: Earphone jack H: USB jack I: Loudspeaker 3. User Manual Info Please read User Manual carefully When using, you may see the below supplemental information. Tip: explanation or introduction of the related topics Related information: expansion of related topics Precaution and Notice: Precaution or Notice of related topics. Please pay more attention on the precaution and notice and follow the operation intructions. Chapter 2: Basic usage 1.
b. Please plug the another side of the car charger to cigarette lighter to charge the device. 4. Starting up and shuting down a. Press the power button long time to start up the device. Notice: Intense humidity fluctuations or moisture will contribute to short circuit in machine internal. Therefore, starting up the device after the device adapting the surrounding when the external condition changes significantly. b.
Mobile Device Icon (4) Please connect the navigator to the computer by use of USB cable. (5) Then Computer will show: new hardware found. Please enter into computer drive lable(盘符) selecting area, double click Mobile Device icon and enter into navigator storage area. Then you can copy and paste data. Data security: Please copy system data to external storage devices when update system data. YF International is not responsible for system data corruption or loss.
Chapter 3: Main Functions 1. Main interface The menu of the device is three dimensional with superfine interface. Tap the triangle icon on the lower- left or lower-right corner, you can rotate the UI interface. It is interesting to press the bigger icon, such as , to left- drag or right-drag the menu to operate. Tap the icon on the top-left corner, then you can enter into the related info service and quick setting.
Tap Wi-Fi icon or on the top-left corner on the main menu, then enter into Wi-Fi setting interface as below;. Tapping“turn off ” or “turn on ” can turn off /turn on Wi-Fi module. Choose and tap the available network, then tap “advance” icon, you can set the network. Interface as below: Tap“IP setting” icon, you can set the network address (interface as below). Select Auto or Manual for network setting. Then tap the saving and tap to exit the current interface.
Input password, tap “connect” for connecting the network; then tap “disconnect” for disconnecting the network. B: Network connection succesfully, then you can log on and surf the internet.
Tap to choose hiding or showing the soft keypad icon Bluetooth A: Choose bluetooth interface as follow: Tap bigger icon in the middle, smaller icon on the bottom or short-cut icon in the top-left corner, you can enter into bluetooth inerface as follow: The bottom is the connection status bar.
Connect Delete pair info Disconnect If paired mobile phone not in the device list, please tap icon and enter into searching interface and pair with mobile phone( mobile phone’s bluetooth should be power on). The interface as below: Notice: Please keep the bluetooth function of the mobile phone on and the bluetooth mobile phone around the PND C: Outgoing call Tap below.
D: Call fail E: Incoming call F: Active call
: start up or shut down the MIC : switch the call to mobile phone : tap to open the small keypad G: Setting Tap icon and enter into bluetooth setting interface as below: Name: The device’s display name in the bluetooth transmission process.
H: Dial-up network ( DUN) Notice: The paired mobile phone must support GPRS function. Tap icon and enter into the below interface.
You can choose SIM card network operator or input network operator name, then tap “connect”. Exit to main menu after connection succesfully and tap “IE Interface” to surf the internet.
: Delete selected phone number 3.
4.
B Equalizer H Music list C Previous I Volume control D Play/Pause J Lyrics display E Speed bar K Minimize F Next L Return to main menu C.
Multiple choice Single delete Delete all 5.
6.
Bookmark setting interface as below: 8.
9: Application Tap application icon on the main menu and enter into the below interface:
10: Game Tap Game icon and enter into the below interface: 11: Setting
Tap setting icon on the main menu and enter into the below interface: A: Volume Tap icon on the syetem menu and enter into the below interface:
B: Backlight Tap icon on the system menu and enter into the below interface: C: Language Tap the icon on the system menu and enter into the below interface: D: Date Time Tap icon on the system menu and enter into the below interface:
E: Calibration Tap the icon on the system menu and enter into the below interface: F: System Info Tap icon on the system menu and enter into the below interface:
G: USB Tap the icon on the system menu and to set the USB working mode: MASS STORAGE & MS ACTIVESYNC H: Nav Path Tap the I: Factory Reset icon on the system menu and enter into the below interface:
Tap icon on the system menu and enter into the below interface: J: Explorer Tap icon and enter into WINCE 6.