Operating Instructions and Installation Instructions

VARINO GRANDE 350 - 600

We reserve the right to make changes to dimensions and construction 13 Edition 10.07.2015

6.4. Placement into the boiler room

The condensing unit can be placed in position in various ways.

The condensing unit is delivered on wooden pallets which are suitable for a fork lift truck, pallet roller or

armoured rollers.

In addition, the condensing unit is delivered with lifting eyes and the boiler can be placed by means of lifting gear.

The components may only be assembled by trained personnel.

6.4.1. Positioning by means of wooden pallets

After positioning the condensing unit, the wooden pallets must be removed.

6.4.2. Positioning by means of lifting gear

The condensing unit is delivered with lifting eyelets and the boiler can be placed by means of a lifting gear. After

positioning, the eyelets must be removed.

6.5. Planning dimensions

6.5.1. Minimum distances for positioning the unit

A: Recommended 800 mm

Minimum 600 mm

B: 500 mm needed to assemble the casing

C: Minimum 1200 mm (from casing)

D: Minimum 2000 mm (from support)

E: 500 mm needed to assemble the casing.

This part of the casing needs to be dismounted for

disassembly of the gas train.