User's Manual

YS268 Single Function Remote Control Car

Battery Installetion:

-Transmitter:

1. Remove battery cover

2. Insert one 9Volt battery into the battery compartment

3. Replace battery cover firmly.

- Vehicle:

1. Remove battery cover

2. Insert 4 UM-3 1.5 Volt (AA) batteries into the battery compartment.

3. Replace battery cover firmly.

Operating Instruction:

1. Turn the car switch to “ON” position.

2. Operate the car with transmitter.

3. Push and release the shaft to start the car in forward direction/ Reverse turning.

4. Turn the car’s switch to the “OFF” position after used.

5. Remove all batteries from the transmitter and car

Note: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modification could void the

user’s authority to operate the equipment.

YICK SHUN ELEC TOYS

FCC ID : J7IYS268

JOB # : 973H1

EXHIBIT # : 5

PAGE 1
YICK SHUN ELEC TOYS FCC ID : J7IYS268 JOB # : 973H1 EXHIBIT # : 5 YS268 Single Function Remote Control Car Battery Installetion: -Transmitter: 1. Remove battery cover 2. Insert one 9Volt battery into the battery compartment 3. Replace battery cover firmly. - Vehicle: 1. Remove battery cover 2. Insert 4 UM-3 1.5 Volt (AA) batteries into the battery compartment. 3. Replace battery cover firmly. Operating Instruction: 1. Turn the car switch to “ON” position. 2. Operate the car with transmitter. 3.