Product Manual

Monitor: Voltage range

Camera: Voltage range

12V-24V

Note : To ensure the service life of the camera, please keep the voltage

below 24V ( the camera may be damaged after a period of use if not ).

II. Please test the monitor and camera before installation .

After you receive the system, you must test the device before

installation. Please reference the way below image showed.

(1) Plug power cords to the monitor and merged the power wires to

camera ,red-red, black-black.

(2) Loose the screws on green adapter, then insert the red

wire(copper wire) to Positive(+) slot, and the black wire(copper wire)

to Negative(-) slot.

(3) Plug to cigarette lighter and turn on the red switch. If you see

image on monitor, it means the system works well.

After testing, you need to make sure that the image appears on screen,

Then you can mount the monitor.