Installation Guide

3
Settings - Clock
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the
Settings - Clock keypad.
Use the Settings - Clock keypad to scroll through the features that
can be changed. Each press of the Settings - Clock keypad will
advance the display to the next setting. After selecting the feature
to be changed, the control will prompt you for the required input.
Details of all of the feature changes are explained in the following
sections.
Press CANCEL/✖ to exit Settings - Clock.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press Settings - Clock until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Audible Tones Disable
Turns off most tones, including the end of cycle tone and key
press tones. Reminder tones remain enabled when audible tones
are disabled.
1. Press Settings - Clock until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press Settings - Clock until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press Settings - Clock until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press Settings - Clock until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press Settings - Clock until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
12/24 Hour Clock
1. Press Settings - Clock until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press Settings - Clock until “12 HR AUTO OFF” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English and French.
1. Press Settings - Clock until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypad as instructed by the scrolling text to
select the new language.
4. Press CANCEL/✖ to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press Settings - Clock until “TEMP CALIB” is displayed.
2. The current setting will be displayed.
3. Press START/▷ to select the choice displayed in Step 2. Wait
several seconds for the display to change or press START/ ▷,
and then continue with Step 4.
4. Press the “3” keypad to increase the temperature in 5°F (3°C)
increments, or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The range is from
-30°F to +30°F (-18°C to +18°C).
5. Press START/▷.
6. Press CANCEL/✖ to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to
be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
1. Press Settings - Clock until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL/✖ to exit and display the time of day.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not
turn On or Off, and the heating elements will not turn On or Off
immediately.
NOTE: If a power failure happens while Sabbath mode is running,
the oven will show Sabbath mode is ON, but the Bake cycle will
not be ON. If the oven door is opened during this time, the oven
light will turn on.