User's Manual

12


Installthesix(6)includedAAbatteriesinthebackofthetransmitterbyfirstremovingthebattery
compartmentcover/door.Ensureproperpolarityofthebatteriesbeforeinstallingthemasnotedby
themarkingsmoldedintothebatterycompartment,thenre‐installthecompartmentcover/door.

CheckforproperoperationofthetransmitterbyslidingthepowerswitchtotheONposition(slideit
upward).TheredLEDindicator(abovetheswitch)willbegintoblinkslowlyandtheLCDscreenwill
poweron.ThisindicatesthetransmitterispoweredonandtheAAbatteriesareinstalledcorrectly.

NOTE:Thetransmitterisequippedwithalowvoltagebatteryalarm.Ifatanytimetheaudiblealarm
isonitwillbenecessarytoreplacetheAAbatterieswithnewones.




TheChronosCX100includesaMicro4‐ChannelLPCXHelicopterTransmitterequippedwith
2.4GHztechnology,dualrates,digitaltrimsandabacklitLCDscreen.


Installin
g
the Transmitter Batteries
Transmitter Details