User's Manual



TheMicro4‐ChannelLPCXHelicopterTransmitterincludedwiththeChronosCX100featuresunique

andexclusivesoftwarethatmakesitpossibletoselectandsetthe‘controlmode’.Typically3‐channel

RChelicoptersincludetransmittersthataresetto‘Mode4’whichplacesthrottlechannelcontrol

onlyontheleft‐handstickandrudderandelevatorchannelcontrolontheright‐handstick.However,

4+channelRChelicopterstypicallyincludetransmittersthataresetto‘Mode2’whichplacesthrottle 

andrudderchannelcontrolontheleft‐handstickandelevatorchannelcontrol(plustheadded

control/channelofaileron)

ontheright‐handstick.



IMPORTANTNOTE:Ifyouplantofly4+channelRChelicopters(orevenquadcoptersandairplanes)

inthefuturewestronglyrecommendsettingthetransmittertoMode2.



Thebuttonlocatednearthetopleft‐handcornerofthetransmittercanbeusedtoselect

andset

Mode2orMode4.Bypressingthebuttonandholdingitdownwhileswitchingthetransmitteronthe

modewillchangefromtheonethatwaspreviouslyset(soifthetransmitterwassettoMode2itwill

thenchangetoMode4).Theselectedcontrolmodewillbedisplayedas‘2’forMode2and‘4’for

Mode4ontheleftorrightsideofthehelicopterillustrationontheLCDscreen.



IMPORTANTNOTE:Donotattempttochangethecontrolmodewhilethehelicopteristurnedon.



Transmitter Control Mode Selection

(

Mode 2/Mode 4

)